Menu Close

Stanley Ground Rod Driver GD50

Contact us for pricing.

The Stanley GD50 Ground Rod Driver is ideal for driving rods with proven, hard-hitting technology. Two models are available, the GD50132RF that drives 1/2-inch and 5/8-inch rods and the GD50133RF that drives 3/4-inch and 1-inch rods.

The Stanley GD50 Ground Rod Driver is ideal for driving rods with proven hard-hitting technology. Accudraulics has two models available, the GD50132RF that drives 1/2-inch and 5/8-inch rods and the GD50133RF that drives 3/4-inch and 1-inch rods.

The lifting eye allows the operator to suspend the driver above the rod with ease. The long side handles give the operator control during the driving process. The in-line valve in the 8-foot hose whips gives the operator On/Off control.

Both GD50 models have driving anvils which are designed to fit the rods which helps to minimize damage to the rod ends. The anvil which remains in contact with the rod while the hammer in the ground rod driver delivers its high energy blows to the anvil. The deep socket of the anvil keeps the driver from jumping off the end of the rod.

You can change the capacity of a ground rod driver via the inter-changeable anvils.

[tab title=”Product Features” icon=”check” icon_color=”#3cabce”]

  • 5-9 gpm (19-34 lpm) operating range.
  • In-line valve on hoses for ON/OFF control.
  • Assist handles.
  • Lifting eye.
  • HTMA quick disconnect couplers.

[tab title=”Specs” icon=”check” icon_color=”#3cabce”]

MODELWEIGHTLENGTHWIDTHROD SIZEFEATURES
GD50132RF24 kg65 cm41 cm1/2″ – 5/8″
diameter
In-line valve
and hoses.
GD50133RF24 kg65 cm41 cm3/4″ – 1″
diameter
In-line valve
and hoses.