Menu Close
Digga Auger Drivers 1DSS - 2DSS, 1-2.5 ton machines

Digga Auger Drives For Skid Steer Loaders 1t – 2.5t

RS12-Auger-Anchor-Driver1 Digga 5DDS 6DDS for Hi-flow Skid Steers

Digga’s drilling augers for skid steer loaders are the ultimate in performance, quality, and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Complete manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Categories: , , , , , ,
SPECSIDSS2DSS
TORQUE (FT-LBS
@ 3000 PSI)		1,4672,254
MAX TORQUE (FT-LBS
@ 3500 PSI)		1,7122,630
RECOMMENDED FLOW (GPM)6-1610-26
MOTOR TYPEEATONEATON
MAX PRESSURE –
DO NOT EXCEED		3500 PSI @ 16 GPM
MAX FLOW –
DO NOT EXCEED		30 GPM @ 1800 PSI
MAX HORSE POWER3333
PRESSURE RELIEF VALVEN/AN/A
STANDARD OUTPUT SHAFT2″ HEX2″ HEX
HALOOPTIONALOPTIONAL
RECOMMENDED AUGERA4 / RC4A4 / RC4
MAX DRILLING DIAMETER
(CLAY / SHALE)*		12″24″
MAX DRILLING DIAMETER
(EARTH)*		24″30″
WEIGHT (LBS)101125
OVERALL LENGTH (IN)24.6″25.9″
DIAMETER (IN)7.4″9.4″

(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.