Accessories Archives - Accudraulics

Showing all 45 results

Accessories

Digga Rock Auger Bits – DR6

Digga’s DR6 AUGER features rotating rock picks and is specially designed for drilling from soft fracturable rock to very hard rock. DR6 Auger also features…
Accessories

Digga Auger Bit – RC6 EArth and Rock

RC6 auger bits are available with a range of different teeth options to suit most ground conditions including earth, hard soils, shale, clay, and permafrost.…
Accessories

Digga Earth Auger Bits – A6

With the A6 range of auger bits from Digga, you benefit from its 1 3/4 hex drive pilot over the square drive – giving machines…
Accessories

Digga 5000-7000 ft lbs excavator anchor drives

Developed in conjunction with leading screw anchor / helical pile installers around the world, Digga brings you the only true anchor drives available – designed…
Accessories

Digga RC10 – Combination and Rock Auger Bits

With the RC10 range from Digga, you benefit from its 1 3/4 hex drive pilot over the square drive – giving machines with higher down…
Accessories

Digga Drive Head UD 190 2 speed anchor drive

THE FASTEST DRIVE HEAD IN ITS CLASS Digga’s High Powered Drives operate at a MAX PRESSURE OF 5,000 PSI providing you with the speed and…
Accessories

Stanley Hydraulic Power Unit HP210

The HP210 Stanley power unit can run two 5 gpm tools simultaneously or one tool at 10gpm. It is ideal for on-site hydraulic power needs…
Accessories

Stanley Hydraulic Power Unit HP Twin8

The TWIN8 decreases operational costs, and increases productivity and versatility – and does it all with a reduced power unit footprint.
Accessories

Stanley Hydraulic Power Unit HP8

The HP8 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and…
Accessories

Stanley Hydraulic Power Unit HP12

The HP Stanley power unit can run one circuit at 8, 10, or 12 gpm. It is ideal for on-site hydraulic power needs with its…
Accessories

Stucchi APM Flat Face Couplings ISO 16028 Interchange

The APM Series Flat Face Couplings are state-of-the-art solutions for high residual pressure. They address residual pressure in a circuit anywhere thermal expansion of trapped fluid causes…
Accessories

Stucchi FL Series Couplers ISO 16028 Interchange

The FL couplings are manufactured in 316 stainless steel to eliminate leakage during connection/disconnection, reduce contamination in the circuit, and offer optimal resistance to corrosion. Standard…
Accessories

ICS PowerGrit XL Pipe Cutting Chain

The new PowerGrit XL chain, with an enhanced diamond coating formulation, improves cutting performance on ductile and cast iron pipe and drastically reduces cut time…
Accessories

ICS Force 4 Cross-LINK Chains

Each component in the ICS Force 4 Cross-LINK chain is engineered to improve chain stability and efficiency in the cut. The result is a chain…
Accessories

Stucchi VP Series threaded flat face couplers

$67.40

The VP Series Auto-Lock Sleeve Flat Face Coupler is the most popular solution for high residual pressure. With an auto-lock sleeve and the ability to connect/disconnect…
Accessories

Stucchi IRB Series Quick Coupler – IRB, IRBO, IRBX

The IRB Series Quick Couplings are interchangeable to ISO B standard (ISO 7241-B). The IRB is offered in three different high-quality materials to meet different application challenges—IRB carbon…
Accessories

Stucchi A-HP Series Flat Face Coupling

$72.85

The A-HP Flat Face High-Pressure Series Coupler offers a simple yet highly effective, patented safety system to prevent accidental disconnection, making it the solution for…
Accessories

Stucchi AG Interchange Series Poppet Coupler IR, IRV, IRS

$18.00

The Agriculture IR Series Hydraulic Quick Couplings offer automatic shut-off during disconnection. The IR features a variety of connection mechanisms: ball (IR), poppet (IRV), push pull…
Accessories

Stucchi RoT-lock Series Coupler – VT17-ZN

Stucchi’s multi-year experience in screw-to-connect Flat Face couplings has led to the creation of VT, the new top-of-the-line series for this kind of couplings. Thanks to…
Accessories

Pengo Auger Pilot Bits

$0.00

Pengo makes a complete range of pilot bits for their augers and we have them in stock. The SB pilot bit is fish-tailed shaped and…
Accessories

Snow Tires for Skid Steers and Bobcats

Snow tires help your skid steer get their power to the ground in snow and ice. These tires are 6.6” – 8.5” wide, compared to…
Accessories

Stanley HP Hydraulic Power Unit HP8

HP8 Series Hydraulic Power Unit – The Proven Workhorse The HP8 hydraulic power unit is engineered for continuous professional use and is optimized to deliver…
Accessories

Oil Spill Kit – 95 gallon pickup capacity

95 gallon pickup capacity – Whether you need to clean up a dangerous chemical spill or eliminate a slip-and-fall hazard, we have a spill kit…
Accessories

Oil Spill Kit – 55 gallon pickup capacity

55 gallon pickup capacity – Whether you need to clean up a dangerous chemical spill or eliminate a slip-and-fall hazard, we have a spill kit…
Accessories

Oil Spill Kit – 15 gallon pickup capacity vehicle kit

15-gallon pickup capacity – Whether you need to clean up a dangerous chemical spill or eliminate a slip-and-fall hazard, we have a spill kit for…
Accessories

Oil Spill Kit – 30 gallon pickup capacity

30 gallon pickup capacity – Whether you need to clean up a dangerous chemical spill or eliminate a slip-and-fall hazard, we have a spill kit…
Accessories

Ship Auger Bits for Wood Utility Poles and Railroad Ties

We carry a wide variety of high-quality ship auger bits that are designed to cut extremely smooth with true hole sizes through and into the…
Accessories

Moley – Copper Wire Granulator Systems

Moley Copper Wire Granulators Systems granulate copper or coils and aluminum allowing you to maximize profits! Copper Wire Granulators range from 250 to 2600 lb/hr.
Accessories

Stanley Submersible Pumps – SM20, SM21, SM50

The SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it’s small size allows it to fit in a box 11 inches…
Accessories

Stanley Trash Pumps TP08 and TP03

The Stanley hydraulic TP03 and TP08 lines of trash pumps are a great example of the power of hydraulics when it comes to pumping liquids…
Accessories

A Pallet of New Link-Belt Excavator Parts

Only $3999 for the entire pallet of LinkBelt Excavator parts! Save BIG on all the parts you need for your Link-Belt excavator. Complete parts list…
Accessories

Blastcrete RD6536 Skid Steer Concrete Pump

The Stanley line of vibratory plate compactors delivers maximum efficiency and force, able to perform in the most demanding of settings. These attachments are truly…
Accessories

Custom Blade Kits for Shears and Buckets – Made to Order

We will assemble a custom line kit with all the parts you need just for YOUR MACHINE. Let us know the make and model.
Accessories

Custom Hydraulic Line Kits

We will assemble a custom line kit with all the parts you need just for YOUR MACHINE. Let us know the make and model.
Accessories

Cembre Hydraulic Fluid Pump – Cordless and Radio Controlled B68M-P18A-RC1

The new Cembre portable electro-hydraulic pump B68M-P18A-RC1 is battery operated for independent use. Having the inherent strengths of the Cembre 18V tool range, the B68M-P18A-RC1…
Accessories

Cembre Hydraulic Cutting Heads – Y Version

Available in Winnipeg: Cembre’s Y hydraulic cutting heads are specifically designed for cutting copper and aluminum cables having overall diameter up to 4-3/4″.
Accessories

Stucchi VEPHDL Series Hydraulic Couplings – Thread to Connect

The VEPHDL Series Heavy-Duty Locking Flat Face Coupler is the ultimate failsafe solution for the most demanding hydraulic applications. This locking female version is interchangeable with standard…
Accessories

LaBounty Saber Shear Guards

Accudrualics carries Shear Guards available for each model of LaBounty Shears.
Accessories

TP40 4″ Discharge Submersible Trash Pump

The TP40 compact submersible trash pump is a lightweight, efficient way to move large volumes of liquids that can contain sand, dirt and gravel very…
Accessories

TP30 3″ Discharge Submersible Trash Pump

The TP30 compact submersible trash pump is a lightweight, efficient way to move large volumes of liquids that can contain sand, dirt and gravel very…
Accessories

HDI – SP30 3″ Discharge Submersible Water Pump

The SP30 compact submersible hydraulic pump is a light-weight, efficient way to move large volumes of liquids quickly. This submersible centrifugal design requires no priming…
Accessories

Stucchi Series A Premier Interchange Couplings Flat Face

“A” Series or Premier Series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG Series or competitors products.
Accessories

Stanley SM50 Submersible Sump Pump

Stanley hydraulic pumps exemplify the pure power of hydraulic tools.
Accessories

Stanley HP28B02 Power Unit – Twin Circuit hydraulic portable power plant

The HP28 (TWIN8) twin circuit hydraulic power unit offers a revolutionary design capable of operating two tools at 8 gpm simultaneously. For the first time…
Accessories

AMA WEAR 814H Hard Facing

AMA WEAR 814H electrode is an enhanced alloy for HARD FACING applications requiring heat, spalling, and severe crushing resistance. Made specifically for LaBounty Shears you…

Call Toll Free

Newsletter Signup