Menu Close

Oil Spill Kit – 55 gallon pickup capacity

55 gallon pickup capacity – Whether you need to clean up a dangerous chemical spill or eliminate a slip-and-fall hazard, we have a spill kit for any size and type of spill.

Whether you need to clean up a dangerous chemical spill or eliminate a slip-and-fall hazard, we have a spill kit for any size and type of spill. All our spill kits are packed with quality SpillTech products to help you comply with environmental regulations. Having the right absorbents on-hand when spills occur ensures a quick response – your best weapon against spills.

This 55-gallon spill kit includes:

QtyDescription
155 Gallon Overpack
3Oil-Only Sorbent Boom, 5” x 10’
50Oil-Only Responder Mats
3Oil-Only Responder Socks
1Splash Goggles
1Splash Gloves
1Splash Coveralls
1Neoprene Drain Cover
26 MIL DISPOSAL BAG
1PLUG N’ DIKE
1Caution Tape, 200’ Roll
1List of Contents
1Set of Spill Procedure Instructions

SPILL PROCEDURE INSTRUCTIONS

  • EMPTY OUT DRUM AND PUT ON ALL PROTECTIVE WEAR,
  • IF DRAIN OR MANHOLE ARE NEARBY, IMMEDIATELY COVER WITH DRAIN COVER,
  • ASSESS LEAK ORIGIN AND ATTEMPT TO STOP LEAK AT SOURCE WITH PLUG ‘N’ DIKE REPAIR COMPOUND, INSTRUCTIONS AS NOTED BELOW,
  • ENCIRCLE SPILL WITH ADSORBENT BOOM,
  • PLACE ADSORBENT PADS INTO SPILL CIRCLE TO ADSORB FLUID, RETRIEVE WHEN SATURATED,
  • USE GLOVES AND PLACE CONTAMINATED CONTENTS INTO DISPOSAL BAGS,
  • CONTACT YOUR ENVIRONMENTAL OR SAFETY OFFICER FOR CORRECT DISPOSAL PROCEDURES.

PLUG AND DIKE PROCEDURE

  • Wear gloves for the entire procedure,
  • Open Plug N’ Dike jar,
  • Scoop and press onto puncture,
  • Give 1/4 turn to lock into place,
  • Smooth off outside and edges with water,
  • Cover patch with grease if left in place for more than 8 hours to prevent drying up,
  • If the drum is a problem, roll on the side with the puncture facing up,
  • This is only a temporary plug method. Attempt to find a more permanent solution as soon as possible.

hydraulic tool manual icon book hydraulic tools and attachments